The sprayer arm on a dishwasher shoots water at the dishes, using power from the pump and the motor beneath it. Sprayer arms rarely break, but they can sometimes become clogged with minerals or detergent. In many cases, the arms can be cleaned effectively. In other cases, it may be easier to replace an arm entirely.
Instructions
1. Disconnect your dishwasher from its power source. This may entail unplugging the dishwasher or flipping a switch on the circuit board.
2. Remove the lower rack of the dishwasher.
3. Examine the spray arm on your dishwasher. Some spray arms are connected by a bolt. If your arm is bolted in, use the screwdriver to remove the bolt.
4. Gently rock the spray arm back and forth while pulling it out of the dishwasher.
5. Replace any washers.
6. Gently slide in the new spray arm. If necessary, rebolt the arm into the dishwasher.
7. Replace the lower rack of the dishwasher.
Related posts
Remove the clip pieces connected to the lower spray arm in your Hotpoint dishwasher.When you are running a cleaning cycle with your Hotpoint dishwasher, the lower spray arm dispenses water that sp...
You will need pliers to repair your Maytag dishwasher.Both the top and bottom spray arms in a Maytag dishwasher need to function correctly in order to get dishes clean inside the unit. A broken to...
Loud noises coming from a dishwasher may indicate a problem.A swishing sound coming from your dishwasher is normal. A dishwasher tends to make this sound as the sprayer arms rotate. However, a lou...
Remove all dishes and both racks from the dishwasher to give yourself room to work on its spray arms.Amana dishwashers, like most dishwasher models, use spray arms, also called wands, to distribut...
Hotpoint is a offered by Whirlpool (General electric), also it is an expert in kitchen home appliances, including dish washers. Hotpoint dish washers continue for a very long time should you corre...
