Kenmore dishwashers bank on a water inlet valve, sometimes called a weewee meet valve, to govern the menstruation of pee into the dishwasher. The h2o intake valve is placed butt the glower admission impanel of the widget, and connects instantly to the water business. If the h2o intake valve fails, it may not appropriate h2o to accede the dishwasher during the race cycles/second, or, it may let overmuch irrigate into the dishwasher, potentially causation the dishwasher's drift permutation to slip, which chicago the washables cycles/second. When the intake valve has failed, the but answer to restoring your dishwasher is to exchange it, which is a undertaking that does not need the help of a overhaul technician.
Instructions
1. Cut the dishwasher breakers in your habitation's chief servicing venire.
2. Cut the water valve, which controls the stream of weewee to the dishwasher. The water valve is oftentimes set infra your kitchen cesspit. To cut the valve, twist the address clockwise until stringent.
3. Murder the screws securing the depress admission impanel, placed on the strawman of the dishwasher, under the threshold. Withdraw the jury.
4. Use an adjustable pull to take the water job from the water inlet valve. Situation a towel nether the demarcation anterior to removing it to apprehension any pee unexpended in the job.
5. Hit the brass elbow from the bum of the intake valve exploitation an adjustable wrench. The brass elbow is brass in color, and is the piece that was directly connected to the water supply line.
6. Remove the screws securing the water inlet valve to the dishwasher frame, and then pull the valve down.
7. Pull the wire connector off the inlet valve terminals.
8. Squeeze the clamp on the water hose connected to the inlet valve, and then move the clamp down the hose. Pull the hose off the inlet valve, and then discard the valve.
9. Attach the water hose to the port on the new inlet valve, and then squeeze the clamp using pliers. Move the clamp over the port to hold the hose in place.
10. Secure the wire connector to the terminals on the new inlet valve.
11. Align the new inlet valve with the dishwasher frame, and then secure it to the frame using the two screws that were removed.
12. Remove any plumber's tape remaining on the brass elbow, and then wrap new plumber's tape around the threading of the elbow. Be sure to wrap the tape clockwise, rather than counterclockwise.
13. Install the brass elbow in the underside of the new water inlet valve. Insert the threading with the plumber's tape into the end of the valve, and then use an adjustable wrench to tighten.
14. Connect the water supply line to the brass elbow, and use an adjustable wrench to secure.
15. Replace the lower access panel, and reinstall the screws to hold it in place.
16. Restore power to the dishwasher in your home's main breaker panel.
Related posts
Your dishwasher's water inlet valve allows water to enter the dishwasher during a wash cycle. The inlet valve connects to the water supply line under your sink. If the water inlet valve malfunctio...
A dirty fill valve can prohibit your dishwasher from washing your kitchenware properly.The Whirlpool Corporation is a well-known manufacturer of home appliances that traces its origin to the early...
If you notice that your GE dishwasher is slow to fill up or isn't filling up at all, you may have a problem with the fill valve screen. The fill valve draws water from your home's water supply for...
A dishwasher that won't fill may be clogged.Frigidaire dishwashers hook up to the water supply line under your sink, as well as the drainage system. During the wash cycle, water comes in through t...
Bosch is a German company that offers technology solutions, including consumer appliances. The company offers three different types of dishwashers: visible control, concealed control and custom pa...
