Tuesday, August 6, 2013

Install A Water Line For A Dishwasher

Dishwasher placed next to sink


Installing a water line and drain pipe for a dishwasher is the same for a new dishwasher as it is for an old one. Once the location is chosen and the electrical works are connected, and before the electricity is turned back on, install the water line and drain pipe for the dishwasher. Proper placement of water tubes and drain pipes will ensure the dishwasher works correctly.


Instructions


1. Cutting the water line


Shut off the water and empty the hot water line before starting any work on the water line. Put a container under the hot water line and cut the line to install the T-fitting.


2. Compression fittings


Place a compression fitting on each end. Tighten the fittings by hand, and then a quarter turn with the adjustable wrench.


3. Back of dishwasher


Attach the shutoff valve to the T-fitting. Secure the water line from the dishwasher to the shutoff valve.


4. Keep the container under the hot-water supply line. Turn the water back on. Look for leaks in all connections. Carefully tighten the connections a little more if there is a leak.


5. Installed dishwasher


Install the drain hose by measuring and cutting the drain tube to fit from the dishwasher to the drain. If attaching the drain hose through a garbage disposal, there will be space in the disposal to install a dishwasher drain pipe. If there is not a disposal, a waste T-fitting will need to be installed to attach to the drain.


6. Secure all connections. Turn on the water and test for leaks. If leaks are present, tighten the connections a little more, being careful not to over tighten. Once all connections are secure, finish installation of the dishwasher and run a test cycle. Check again for any leaks. Once none are found, installation is successful and finished.








Related posts



    A built-in dishwasher can make quick work of cleaning the kitchen.A built-in dishwasher can make cleaning the kitchen after cooking and eating a much quicker task. Many new dishwashers are far mor...
    If you are replacing your single-bowl kitchen sink with a double-bowl sink and you have a dishwasher, you will need to know connect the dishwasher drain line to the new sink drain pipes. Common mi...
    Drain line problems may cause standing water in a dishwasher.There are three main reasons for standing water in your dishwasher at the end of a cycle. if this problem has occurred since the applia...
    A leaky dishwasher may just need a new water-supply line.In most kitchen installations the dishwasher and the sink share a common water supply, provided by a line known as a dual-supply valve. Som...
    Make short work of dirty dishes with an undercabinet dishwasher.Installing a dishwasher can help improve the efficiency of your kitchen and also add value to your home. These appliances work by ta...