Thursday, December 26, 2013

Drill Holes In A Granite Countertop

Drill Holes in a Granite Countertop


If you are comfortable using power tools, you can drill holes into a granite countertop with ease. When following these steps, use extreme care and caution. If you are to rough with the power tools and don't follow the proper precautions, you can destroy your countertop. Prior to drilling the holes, make sure that your tools are in proper working condition. Be careful to use only sharp bits and blades with a smooth running jigsaw and drill.


Instructions


1. Take measurements of where you want to drill through the countertop. Mark the measurements with easy to see tape. If you need any supplies, you can buy them at a home specialty store, such as Home Depot or Lowes. See the Resources section below for a link.


2. Put the masonry bit into the drill and tighten with the chuck key. Depending on your needs, masonry bits are available from 1/8-inch to 11/4-inch diameters.


3. Place the masonry bit tip on your tape marked spot and start the drill slowly. Make sure to apply an even pressure, and don't allow the drill slip off its mark. Approximately a quarter-inch into the hole, you may apply full pressure on the drill trigger.


4. Keep a tight grip on the drill. You may need to pull the bit in and out once in a while to let the dust out of the hole. Make sure to keep the drill pointing straight in the hole. If you angle the bit while drilling, you will be more likely to break the bit inside of the granite. Use the dust mask to cover your mouth and nose so you do not breathe in the granite dust.


5. If you need larger than a 11/4-inch hole, you can use a jigsaw with a masonry blade. To do this, follow Steps 1 through 4 using a masonry bit big enough to allow a jigsaw blade to slide in comfortably. You can then slide the jigsaw blade into the hole that you just drilled. Holding the jigsaw blade at an angle, cut out to your predetermined line. If you cut straight to your line, you will not be able to angle the blade to it.








Related posts



    Make holes in granite to accomodate your faucet and accessories.If you're installing or modifying a granite countertop, you may find it necessary to drill a hole for a faucet, drain or other fixtu...
    Granite is a hard material but is also porous.Granite countertops are a popular choice for kitchen and bathrooms because of the material's beauty, durability and easy cleaning. Granite is a hard s...
    Granite counters hold less bacteria than traditional kitchen counters.Do-it-yourself home remodeling is a fulfilling way to dramatically change the look of your living space using your own hands....
    Installing your own granite countertops can help cut costs.Installing your own granite countertop is a good option when you are trying to stay within a set budget, but would like to replace your e...
    Granite countertop selections.When the natural, timeless beauty of granite is introduced into a kitchen or bathroom, it instantly transforms the room into an elegant, sophisticated setting. Nature...