The Thermador SMW272 is a unique kitchen appliance, as it combines a microwave, warming drawer and convection oven in one. The oven is a built-in model, meaning that it is intended for installation in the wall of your home's kitchen. The convection oven also has a broiler, which consists of a metal coil heating element on the roof of the oven. After regular use, the broil element may stop functioning. To determine if the broil element or electronic oven control is to blame, remove the broil element for inspection and testing.
Instructions
1. Turn off the oven breaker in your home's main service panel.
2. Open the oven door and remove the oven racks from the oven cavity.
3. Remove the mounting screws at the base of the broil element, as well as the screws securing the element to the roof of the oven.
4. Pull the element away from the rear wall of the oven and then pull the wire connectors off the element terminals. If one of the wires is not securely connected to the element, connect it, reinstall the element and then test the oven again.
5. Examine the element for damage, including any breaks, blisters or cracks. Replace the element if damage is found.
6. Set the multimeter to the lowest setting to measure ohms of resistance, and then calibrate the meter. For specific instructions for your multimeter, refer to the owner's manual.
7. Touch one of the multimeter probes to one of the terminals on the heating element. Touch the other terminal with the other probe.
8. Look at the readout on the multimeter. If the meter shows a resistance between 0 and 50 ohms of resistance, the element is properly functioning, and the electronic oven control must be replaced.
Related posts
Thermador manufactures many types of luxury-home appliances, including cooking, dish-washing and refrigeration products. Thermador ovens are available as both in-wall independent units and in a ra...
Whirlpool ranges and ovens have a circuit board, commonly referred to as an electronic oven control board, or EOC, which functions as the brain of the oven. The EOC controls the heating elements i...
You may encounter a number of problems with your Thermador oven. Some of these problems include error messages on the oven's display, temperature problems or the oven not starting. The problems yo...
The Thermador gas range includes a preheating and oven light to point the status of the baking, also it flashes once the baking process changes towards the extended baking phase. A totally reset o...
Call Thermador if your appliance has the codes of the recalled appliances.From its first electric heaters in 1917, Thermador has been building high-end home appliances for more than 70 years. The...
