Hotpoint dishwashers include a spray tower part that is attached to the top of the lower spray arm located at the bottom center of the dishwasher. The long plastic tower extends up to the bottom dishwasher rack and it sprays an additional blast of water to the dishes during the cleaning cycle. If the spray tower stops dispensing water during a cleaning cycle then you can manually remove the tower part to inspect for any damage and see if it needs to be replaced.
Instructions
1. Disconnect the electrical power from your Hotpoint dishwasher from your kitchen circuit breaker.
2. Open the dishwasher door, then pull the bottom and top racks all the way out of the dishwasher.
3. Locate the spray towers at the bottom center of the dishwasher attached to the top of the lower spray arm.
4. Turn the spray tower counterclockwise to unscrew it and then lift up the tower part to remove it from the dishwasher.
5. Inspect the spray tower for any damage, such as dents or broken pieces, and replace the part, if necessary.
Related posts
Remove the clip pieces connected to the lower spray arm in your Hotpoint dishwasher.When you are running a cleaning cycle with your Hotpoint dishwasher, the lower spray arm dispenses water that sp...
The sump filter screen in a General Electric Hotpoint dishwasher is a cover over the sump filter assembly located at the bottom center of the dishwasher. The sump filter screen stops bits of food...
A malfunctioning dishwasher can lead to arguments.A dishwasher spray arm is propelled by the force of water channeled from the appliance's motor and pump. The spray arm spins around at a rapid pac...
Hotpoint is a offered by Whirlpool (General electric), also it is an expert in kitchen home appliances, including dish washers. Hotpoint dish washers continue for a very long time should you corre...
Hotpoint dishwashers, which are manufactured by General Electric, have a heating element at the bottom of the machine. The heating element heats the water so that the dishes are sterilized as they...
