Adjust the door latch to fix your dishwasher door.
You will need to adjust the dishwasher door latch to fix the door if it will not close. The door latch can come out of alignment from use. Adjusting the latch assembly is a straight forward process on most models of dishwashers. First, remove the securing fasteners for the inner door panel. It is a good idea not to remove the inner door panel completely, just enough that you can access the door latch assembly.
Instructions
Adjust Strike Plate
1. Turn the dishwasher circuit breaker off inside your home electrical panel. Open and close the door and watch where the strike plate makes contact with the door. The strike plate is usually on the front top center of the dishwasher. If the strike plate is out of alignment, it will hit the inside of the door.
2. Pull the dishwasher out of the counter enough that you can access the strike plate securing Torx screw. You may need to open your dishwasher door and remove the two screws that secure the dishwasher mounting bracket to the bottom of the counter with a Phillips-head screwdriver to pull the dishwasher away from the counter.
3. Loosen the Torx screw that secures the strike plate to the washer tub with a Torx driver. Adjust the strike plate so the plate will engage the door latch. Retighten the Torx screw and push the dishwasher back under the counter. Secure the brackets to the counter if your dishwasher uses retaining brackets.
Adjust Door Latch
4. Open the dishwasher door and remove the Torx screws securing the inner door panel to the outer door panel with a Torx driver. The retaining screws are usually around the side edge and top edge of the dishwasher door.
5. Lift the inner door panel enough that you can loosen the two securing bolts on the door latch with a wrench. You only need to loosen the bolts, not remove them.
6. Carefully raise the dishwasher door to align the door latch with the strike plate. Hold the door latch with your finger tips when you align the latch. Lower the door and tighten the door latch securing bolts.
7. Install the inner door panel retaining screws and tighten all screws with the Torx driver. Close the dishwasher door and turn on the circuit breaker.
Related posts
A dishwasher's door switch tells the appliance when it's safe to start the wash cycle. These switches are usually placed in the dishwasher door. When the door shuts and latches, the door switch co...
The latch on your dishwasher door serves a very important function. It ensures that the door remains securely closed during the wash cycle. Most dishwashers have a latch sensor that prevents the d...
Dishwasher door latches can stick or miss the strike plate.Contrary to popular belief, dishwashers do not really wash food-laden dishes but are more designed to sanitize flatware, dishes and bakew...
The purpose of a door vent on a dishwasher is to let out excess hot air and steam during the drying cycle. These vents are typically mounted underneath the control panel in an out of the way place...
The control panel does not need to be removed to replace the front panel.Stainless steel appliances create a sleek and updated look in your kitchen. If you are updating your kitchen, it is not alw...
