Hotpoint is an appliance company owned by General Electric. The company makes many types of low-cost home appliances, including refrigerators, dishwashers and ranges. The door on all Hotpoint ovens is removable so the door or oven can be repaired and cleaned. If the door breaks, it must be replaced with a new door to ensure that you or others do not get burned by the oven and to maintain a steady temperature inside the oven.
Instructions
1. Unplug the oven from the wall outlet and ensure that all components are cool.
2. Open the door to the broil-stop position.
3. Grasp the door with both hands and lift straight up and off the hinges.
4. Rotate the hinges on the oven to the broil-stop position if they have been moved.
5. Lift the new door with both hands and align the hinges on the oven with the hinge slots on the new door.
6. Slide the door onto the hinges until fully inserted.
7. Open and close the door to ensure smooth operation.
Related posts
Hotpoint is an appliance company owned by General Electric. The company manufactures many types of home appliances, including refrigerators, dishwashers, microwaves and ranges. Hotpoint ranges are...
All Jenn-Air ovens have a gasket located on the door jamb, surrounding the oven cavity. The gasket is installed to ensure the oven temperature remains consistent, and that heat does not escape the...
Replace a Spray Arm in Hotpoint DishwashersWhen you find that your dishes are not rinsing clean in your Hotpoint dishwasher, you may need to replace the spray arm. The spray arm may not appear to...
Remove the clip pieces connected to the lower spray arm in your Hotpoint dishwasher.When you are running a cleaning cycle with your Hotpoint dishwasher, the lower spray arm dispenses water that sp...
Replace Door Boot SealThis article shows step by step photo instructions on replace the door boot seal of a common GE brand front load washing machine.The washing machine in this example is the GE...
