A dishwasher that suddenly stops going through the cycles or never completely dry dishes probably has a faulty thermostat. The thermostat controls the heating elements for water and drying. If the thermostat is stuck, the dishwasher won't go to the next cycle because the minimum water temperature requirement is never met. Drying dishes also requires the temperature to get high enough to do the job.
Instructions
1. Remove the front plate of the dishwasher and locate the thermostat. If the thermostat is not located in the front of the unit pull the dishwasher out and remove the back access panel.
2. Disconnect any wires or other parts that are in the way. Separate the wires with a flat blade screwdriver carefully to keep the wires from breaking.
3. Take out the screws attaching the thermostat to the firewall and remove it from the dishwasher. Verify the replacement part matches the original, including the wire connector.
4. Place the new thermostat into place and secure it with the screws. Connect the wires and replace any parts or cables. Attach the front or back plate and replace any molding.
5. Run a hot water cycle and verify the water is heating and the cycle is able to complete. Check the drying cycle and prepare the first load of dishes.
Related posts
Hotpoint dishwashers, which are manufactured by General Electric, have a heating element at the bottom of the machine. The heating element heats the water so that the dishes are sterilized as they...
If you are having problems with the hot water going to your dishwasher, you may need to change your machine's water inlet valve. The valve controls the water flow to the machine, and replacing it...
The thermostat on a General Electric Hotpoint range controls the temperature inside the oven. Many times the thermostat can be adjusted, but if it is dysfunctional, it must be replaced. The thermo...
An important part of a dishwasher is the water supply hose.A dishwasher is a modern convenience that many people use on a daily basis to make their lives easier. One of the most important parts on...
A leaky dishwasher may just need a new water-supply line.In most kitchen installations the dishwasher and the sink share a common water supply, provided by a line known as a dual-supply valve. Som...
