GE Profile ovens are controlled using a control panel at the top of the appliance. The control panel allows you to change the oven temperature, turn the oven on and off and set the kitchen timer. On most GE Profile ranges, the control panel is located above the burners, and the control panel is located above the oven on wall models. You may need to remove the control panel to service the oven's electrical enclosure, which is located behind it.
Instructions
1. Turn off the oven breaker in your fuse box to disconnect power to the oven.
2. Pull off the knobs on the front of the control panel. If necessary, use a spoon to help pry them off.
3. Remove the three screws located on the underside of the control panel and set them aside.
4. Lift the control panel off of the oven. If necessary, disconnect the ribbon clip and any other wires connected to the rear of the control panel to disconnect the wiring and completely remove.
Related posts
If you find the dishwasher control panel is not working, there are a couple of potential reasons why this is occurring: either your dishwasher is having problems connecting to a power source or th...
Neff dishwashers vary in the amount and types of features each model contains. Most models of Neff dishwashers have front decor panels on the doors to add aesthetic value. A Neff dishwasher's deco...
When you notice any problem with the controls, door latch or detergent dispenser on your Magic Chef DU2J dishwasher, then you must know properly remove the front door panel to access the other par...
Some ovens have lights so you can monitor food while it cooks.An electric oven is a kitchen appliance that cooks food. It has heating elements that are powered by electricity and knobs or buttons...
Remove Panels on a Kenmore Laundry CenterYou can access the inside of the washer and dryer on your Kenmore laundry center much like any other washer or dryer. You will need to remove the bridge pa...
