Your Bosch Sensotronic dishwasher can be drained midcycle in the event of a problem. You might have chosen the wrong wash settings, loaded items unsuitable for dishwasher cleaning, or noticed an unusual sound that you want to investigate. Initiating a drain cancels the current cycle; you can easily rescue the necessary items and restart the wash once the appliance is idle. Draining the dishwasher takes less than 5 minutes.
Instructions
1. Locate the pair of buttons on the control panel marked "Cancel Drain." The buttons are sometimes separated on the controls but connected by a line with a dot at each end.
2. Hold both "Cancel Drain" buttons together for three seconds. The dishwasher will stop and begin to drain.
3. Wait approximately 1 minute while the water is pumped out of the dishwasher. Open the door once the dishwasher is silent to remove whatever is inside.
Related posts
You can add forgotten, last-minute pots and pans to the dishwasher.The design and placement of the control panel on Bosch's SHX45M05UC model dishwasher may differ from the controls you have experi...
The Bosch SHX46L dishwasher is an under-counter dishwasher, designed for permanent installation in your home. The dishwasher has three available wash cycles, designed to wash heavily soiled, regul...
The Bosch SHE43M dishwasher has a built-in filter for increased cleaning power.The Bosch Co. makes many different home appliances, including coffee machines, refrigerators, ranges, washers and dry...
A KitchenAid dishwasher that does not drain can cause a mess both inside and outside the dishwasher. Opening a nondraining dishwasher can cause water to fall to the kitchen floor. The dishes insid...
Check the settings on your dishwasher.Under normal circumstances, you should not have to reboot your Bosch dishwasher. You should be able simply to load the unit, set the wash cycle and wait for y...
