Tuesday, March 11, 2014

Extend A Drain Hose On A Dishwasher

Keep your dishes clean with a properly installed dishwasher.


A dishwasher can make short work of the dishes and silverware from your latest dinner party. These appliances spray water from your home water supply over the dishes to remove food and other debris. The water is then pumped out of the dishwasher through a hose and into your sewer system. In most installations, this drain hose is attached beneath your kitchen sink. Extending the drain hose on your dishwasher is a simple operation.


Instructions


1. Turn off the power for the dishwasher at the main circuit.


2. Locate the end of the drain hose where it is attached beneath the sink. It will be attached either directly to the tail piece located just beneath the drain, or to a garbage disposal beneath the sink, depending on your installation.


3. Use the screwdriver to loosen the hose clamp holding the hose in place beneath the sink.


4. Apply a few drops of liquid soap to the drain hose coupling. Slip the coupling inside the end of the drain hose leading back to the dishwasher. Secure with the hose clamp.


5. Apply a few drops of the soap to the other end of the coupling. Attach a drain hose extension to this end of the coupling. Secure in place with a hose clamp.


6. Reattach the end of the extension hose to the drain inlet or the garbage disposal. Secure with the clamp.



Related posts



    Snake out your dishwasher drain if it clogs.If you notice that your dishwasher isn't draining like it used to, or you frequently wind up with water still in the dishwasher when it's finished with...
    Repair a leaking dishwasher hose as soon as you can.If you notice water seeping out from underneath your sink while the dishwasher is running, you should check your dishwasher hose as soon as poss...
    Connect your dishwasher to a drain.A dishwasher is a top time-saving device to install in your kitchen. After a dish cycle runs, the dirty dish water is pumped out through a hose and into your hom...
    One of the last steps you'll need to take when installing a new Kenmore dishwasher is routing the drain hose. In most installations, the drain hose will connect to the garbage disposal or tailpiec...
    Install a drain hose assembly for your dishwasher.The dishwasher drain hose takes the dirty water from your dishwasher's wash cycle and drains it into your home's sewer system. These hoses are con...