One of the newer trends in kitchen remodeling is the integrated dishwasher, designed to look just like any other cabinet in the kitchen. Fully integrated dishwashers are completely concealed by a cabinet door, while semi-integrated dishwashers are partially concealed. A standard dishwasher can be transformed into the integrated look by either purchasing a dishwasher cover kit or attaching an existing cabinet door to the front of the unit.
Instructions
1. Clean the front of the dishwasher door and the back of the cabinet door with dish soap. Let dry completely
2. Lightly sand the front of the dishwasher door and back of the cabinet door. Wipe off any excess sanding debris.
3. Use the caulking gun with PL400 construction adhesive and spread an even layer on the back side of the cabinet.
4. Position the cabinet door in place on the dishwasher door.
5. Hold the cabinet door to dishwasher door with the hand clamps. Let dry for 24 hours.
Related posts
A dishwasher's door switch tells the appliance when it's safe to start the wash cycle. These switches are usually placed in the dishwasher door. When the door shuts and latches, the door switch co...
Rinse your dishes before loading to prevent obstructing your machine's drainage system.KitchenAid dish washers aren't cheap. So if you have one, you'll most likely wish to make certain you are tak...
It's never pleasant to go to open your Frigidaire dishwasher only to find a puddle of water beneath. If the problem is a leaking door seal, you may be able to fix the problem quicker than you thin...
The control panel does not need to be removed to replace the front panel.Stainless steel appliances create a sleek and updated look in your kitchen. If you are updating your kitchen, it is not alw...
Find out why your dishwasher is leaking from the front door.Your Frigidaire dishwasher provides convenience to your life, but if it has developed a leak, it's probably causing you to worry about w...
